Think of the return air as the front door of your HVAC system. Every bit of air that is heated or cooled comes in through the return grille, passes through the filter and then moves on to the heater or indoor unit. If the filter is clogged, the system strains to pull enough air. If it is damaged or sitting loose in its frame, dust slips straight past and ends up in the supply ducts. Either way, a neglected return undoes much of the benefit of a professional clean.
Our return air service starts by removing the grille and filter and inspecting the frame and return duct behind them. We vacuum and clean the return duct and plenum as far as we can reach, wash the grille and either clean or replace the filter depending on its condition and type. Before refitting, we check the filter sits flat and snug with no gaps around the edges, and that the grille closes properly. In older homes, we also look for gaps where roof-space air might be drawn into the return.
This is part of every full clean we do, and can also be booked on its own between cleans. We show you how to remove and check your filter so you can keep on top of it yourself. Most people find it takes only a minute once they know where the clips are, and it is the simplest habit for keeping a ducted system cleaner between visits.